1.This refillable cartridge is suitable for the Epson GS6000 printer.
2.Suitable for cartridge model,as follows:
C13T624100(Black)
C13T624200 (Cyan)
C13T624300 (Magenta)
C13T624400 (Yellow)
C13T624500 (LC)
C13T624600 (LM)
C13T624700 (Green)
C13T624800(Orange)
3.Capacity:950ml
4.Instruction is as follows:
1) First, take the orginal chip out off the orginal cartridge,
2) Install the orginal chip into our compatible cartridge,
3)Third,install the decoder /Electronics card to the printer, the original chip with the decoder performs as same as the auto reset chip(ARC) chip,
5)now, you just need refill the Eco Solvent ink into the cartridge with syringe, and the cartridge can work.
6) Making the Ink flow to smoothly: you can pumping all the air out of the cartridge by syring from refilling hole
Or you also can take out the air hole rubber,then tilt the ink to the refilling hole,finally install the air rubber( the cartridge air pressure will be balance with the outsaid air pressure)
5.Remark:
1)Pls check if there is enough ink in the compitable cartridge.
2) The full ink level is 1000ml, when the ink is only 150ml, pls refill ink into the cartridge. Otherwise, the cartridge cann't work. (You can check the weight of the cartridge by weighing.)
